• The SMART unit on the Kagura LSD9200 is Ant+, Ant+ FEC, and Bluetooth 5.0 compatable and supports all wireless protocols.
• SMART Mag unit : MAX 2200W

• Frame

  • Step bar allows unit to be folded down for easy storage.
  • The 10 kgs fly wheel is among the heaviest in the industry and provides a smooth, balanced feel.
  • To help further reduce vibration a seismic isolator is included on the back side of the foot adjuster.

• Setting

  • Use with 130 & 135 mm in 9 mm Quick Release system, or 142 & 148 mm in 12 mm Thru Axle
  • Shimano and SRAM 8s, 9s, 10s and 11s gears
  • *Not Campagnolo compatible

• Options

  • Special shaped Quick release for Breezer dropouts
  • Spacer Ring for 10s
  • 12 mm Thru axle adapter ( check your thread size )

• Cautions

  • Compatible with 130 & 135 mm in 9 mm Quick Release system, or 142 & 148 mm in 12 mm Thru Axle
  • Horizontal dropouts (such as Piste/FIXI) are not supported.
  • Shimano and SRAM 8s, 9s, 10s and 11s cassette gears
  • *NOT Campagnolo compatible
  • *Freewheel cassette is not included
  • Do not touch the spinning flywheel, belt or chain while training
  • Do not allow any water, moisture or dust to enter the sensitive unit

• Foot Step is installed beside frame to provide the space for touch the toe
• Anti-slip top rubber is good for racing shoes with hard cleat
• Optional kit has longer foot bolts to be compatible with most Minoura rollers. See tab to make sure your model works with the optional kit.
• Front Guard prevents front wheel falling off and keep riding even if you lose balance.

• E-mag : MAX 2000W
• Nd-mag : 100W 200W 300W (40km/h)

  Frame

  “SW-frame” sets up in two positions:

  • Gravity:

    provides a natural riding feel using your weight to contact the roller

  • Fixed:

    for strong resistance training or interval ridding. Trainer is locked into place

  • Concerning Kagura and accurate power reading using power meters:

    Minoura tests the Kagura SMART trainer exclusively on the Power Tap G3 and Shimano Power Crank and is calibrated to work most accurately with these meters. We understand that there are many other power meters on the market and we’re trying hard to add more testing units to our lab. Because each power meter has a slightly different set of programmed instructions on how power is read, along with varying readings from different programs on the market to use on SMART trainers, you will see a difference in readings that range from 0% using he Power Tap G3, to +/- 5% using non-tested power meters. Please also note that it isn’t uncommon for reading to spike in one direction or the other when using programs made for Smart Trainers like Zwift, Kinomap, TrainerRoad, The Sufferfest, and others. This is normal and will be averaged out at the end of the ride through algorithms in both the programs software and the firmware found inside the Kagura unit. Your readings should be accurate to within the stated percentages upon completion of your ride.

    Cautions

    • For standard bicycle frames and dropouts only
    • For 125 to 140 mm quick release rear hub
    • If you want to use thinner hub width such as a fixed speed hub, we recommend using the optional left side long length coupling bolt (400-1285-00 UF-8L).

Magturebo – Indoor Bicycle Trainer for Entry Level Riders

Power Unit

• Standard ferrite magnet.
• Lightweight and adjustable power.
• Generates 425 Watt power at 40 km/h (H range).
• 0.6 kgs dual steel disc flywheel.
• 3 resistance levels.

  Frame

  Basic Steel Frame
  • Basic but durable steel frame.
  • Lightweight steel frame for easy transportation.
  • Fits hub width between 110 – 148 mm ( Track / Fixi / BMX ~ ).
  • Standard thread type hub clamp.

Power Unit

• Standard ferrite magnet.
• Lightweight and adjustable power.
• Generates 425 Watt power at 40 km/h (H range).
• 0.6 kgs dual steel disc flywheel.
• 7 resistance levels.
• Quick release remote shifter.

• Frame

  Basic Steel Frame
  • Basic but durable steel frame.
  • Lightweight steel frame for easy transportation.
  • Fits hub width between 110 – 148 mm ( Track / Fixi / BMX ~ ).
  • Standard thread type hub clamp.